This is a free CNC Programmer Resume example that covers objectives and tips to gets you the best job. This professional resume template with action words will help you in writing perfect CV for the desired CNC Programmer Job.

CNC Programmer Job Description

• Analyzes drawings, sketches, and design data of part to determine dimension and configuration of cuts, selection of cutting tools, and machine speeds and feed rates.
• Determines reference points and direction of machine cutting paths.
• Computes angular and linear dimensions, radii, and curvatures, and outlines sequence of operations required to machine part.
• Prepares geometric layout on graph paper or using computer-assisted drafting software to show location of reference points and direction of cutting paths.
• Writes instruction sheets and cutter lists to guide setup and operation of machine.
• Writes program of machine instructions in symbolic language to encode numerical control tape or direct numerical control database to regulate movement of machine along cutting path.
• Compares encoded tape or computer printout with original program sheet to assure accuracy of machine instructions.
• Revises program to eliminate instruction errors or omissions.
• Observes operation of machine on trial run to prove programmed instructions.

Sample CNC Programmer Resume Template

Contact information

In this section you have to include your Name, current home address, Mobile telephone number, Landline telephone number and your personal email address which is currently used.

• Full name
• Present and permanent addresses
• Telephone numbers
• Email address

Professional or career objective

Your objective is the one that clearly underlines your aims and aspirations in that profession. For example a Management Graduate will have to write an objective which is concise and precisely speaks about his role that he wants to play in the Organization.

Sample Objective for CNC Programmer

A CNC Programming position utilizing expertise in the Manufacturing industry.

Career Achievements

If you have any major Career Achievements or any Appreciation then this is the section where they should be listed. For Example a CNC Programmer can add his/her career achievements like,

• Computer Programming/Modeling
• Cost Reduction Quality and Performance
• Training and Mentoring. Decision Making
• Quality and Productivity Improvement
• Leadership/Supervision
• Performance-Based Training
• Problem-Solving
• Teaching/Training
• New Hire Mentoring
• Modern Inspection Techniques
• New Product Introduction

Experience

Previous work experience plays an important role while applying for a Job and hence it should be well presented in the resume. Most of the questions during your resume will be related to the previous job that you had and hence you should be well prepared for it. You should begin with putting the name of the organization that you worked for, the duration of your work and the post or the designation at which you were working. After this, you can effectively place points in a bulleted format that talk about the responsibilities and the achievements that you may have achieved during your stay at the previous organization. The work experience of an experienced CNC Programmer applying for a job would look like,

CNC Programmer

Manish Engineering works, Mumbai, 2006-Presnt

• Program Mazak Integrex 500 using Esprit cam millturn software 2007
• Program Mazak Slant 50 Lathes using Compact ll software.
• Reported information through formal and informal methods.
• Wrote instructions to guide operating personnel during production runs.
• Compiled and wrote documentation of program development and subsequent revisions.
• Revised and directed revision of existing programs to increase operating efficiency and adapt to new requirements.

CNC Machinist

Pride technology Ltd., Mumbai, 2003 – 2006

• Set up and run CNC Mori-seiki mills
• Machining of Bio-medical devices.
• Edit and proof new programs.
• Ensured quality control standards were maintained
• Used barcode-scanning systems to assure order and inventory accuracy
• Ensured timely shipments to customers according to their specifications

CNC Programmer

Ram’s Techniques, Mumbai, 2000-2003

• Analyzed, reviewed, and rewrite programs, using Esprit Cam.
• Consulted with managerial, engineering and technical personnel to clarify program intent, identify problems, and suggest changes.
• Assisted machinist, and operators to resolve problems in running computer programs.
• Wrote instructions to guide operating personnel during production runs.
• Revised and directed revision of existing programs to increase operating efficiency and adapt to new requirements
• Made tool set up sheets and work instructions
• Prepared programs from solid works graphics, using computer-assisted Cam software

Education and Certification

The academic details need to be mentioned in a tabulated format with respect to the degrees or the courses that the candidate would have undertaken in the past. The latest degree or course comes first followed by the last completed course and hence forth going backwards. For example a CNC Programmer who has completed post graduation or graduation course is applying for a Job or to a company or an organization then his/her details would be like,

• C.N.C. (Computer Numerical Control Lathe and Milling )

S.I.T, Mumbai, 2001

• B.B.A. (Bachelor of Business Administration)

Delhi University, Delhi 2000

• English Typewriting Lower Grade (First Class)

Mumbai Technical Board, 1999

Honors

If you have won any competitions national or international then they could also be highlighted here. For example a CNC Programmer could lay stress on any exams that he may have given or any seminars or conferences attended. If you are a part of any honorary society or any nonprofit organization then that could also be added here.

The honors and the activities section of a CNC Programmer would look like,

• Engineer of the Year Award 2005.

References

The References are generally required so that your present employer can gauge you through the eyes of the people who you were associated with or have worked for. So your teachers or college professors’ details could be placed here. Or your past employer who you would have worked under can also be used as a reference. Ensure that the people whose names you enter know you well and do inform them that you are placing their names as reference because many companies call to confirm. For example the references section of a CNC Programmer could also look like,

Mr. Bharat Jain

Sr. Manager

Ram’s Techniques

bharat@iiijjkk.com

Salary Range of a CNC Programmer

• The average salary received is approximately Rs. 12000 per month. This works out to an annual pay package of 1.50 Lakhs to 1.8 Lakhs per annum CTC.
• The salary from an American perspective works out to be $4500 per Month.

Note: This salary may be variable and it may change from organization to organization.

Frequently asked CNC Programmer Interview Question

• Have you ever had problems in getting your subordinates to accept your ideas or department goals? What approach did you use? How effective was it?
• Have you ever needed cooperation from groups that did not report to you? What did you do to gain cooperation? What were the satisfactions and disappointments?
• Is there a trait or characteristic about you that you find is frequently misunderstood that surprises you when you find out that people think that about you?
• What 3 things do you hope to accomplish in your first year?
• What do you expect of those who report to you? If candidate responds with a one word answer (for example saying, “support” you can probe further by asking the candidate to describe three behaviors that she/he would view as being supportive.
• If you had an unfavorable plan (i.e., budget) to implement, what would you do to get the managers’ buy in and support?

Related Resume Adverstiments